Bandit


The Intimidator 12XP

Companies seeking a highly productive, compact 12-inch capacity drum-style chipper turn to the Intimidator™ 12XP. Featuring a 24-inch diameter drum with a large 13-inch by 17-inch throat opening, it easily process large brush stacks and limbs.

Powerful dual feed wheels mounted in Bandit’s proven Slide Box Feed System provide direct down pressure to material entering the chipper, requiring little-to-no trim work on material before feeding it through the chipper. The standard hydraulic lift cylinder is a great feature providing extra hydraulic down pressure reducing chainsaw work, which makes the unit easier to feed to increase productivity.

The Intimidator 15XP

The Intimidator 15XP is the ultimate 15” capacity drum-style chipper thanks to an industry leading 37” diameter drum and Bandit’s proven slide box feed system. The oversized drum turns at approximately 1,083 RPM, providing unmatched torque easily pulling large diameter material into the chipper. A larger diameter drum chips material requiring less horsepower and fuel while creating less vibration, making it one of the more popular machines available on the market today.

The 15XP features the same diameter drum and feed system as Bandit’s popular 18XP which is the next size up but with 15″ capacity and more compact making the 15XP a powerful solution for those not needing a larger capacity machine. Gas and diesel engine options ranging from 120 to 174 horsepower can be chosen from.

The Intimidator 15XP

The Intimidator 15XP is a 15” capacity drum-style chipper recognized for its 37” diameter drum.  This drum is larger than the drum used by most chipper manufacturers.  The oversized drum turns at approximately 1,083 RPM, providing unmatched torque easily pulling large diameter material into the chipper. A larger diameter drum chips material requiring less horsepower and fuel while creating less vibration, making it one of the more popular machines available on the market today.

The 15XP features the same diameter drum and feed system as Bandit’s popular 18XP which is the next size up but with 15″ capacity and more compact making the 15XP a powerful solution for those not needing a larger capacity machine.  Available with gas an diesel engines ranging from 120 to 174 horsepower.

The Intimidator 18XP

The Intimidator 18XP  is a highly productive 18″ capacity drum-style chipper. Its powerful dual feed wheel system driven via 2 32.3 CID hydraulic motors provides around 4,480 pounds of pulling power.  The standard hydraulic lift cylinder enhances performance by providing additional down pressure reducing chainsaw work.

The Beast 1680XP

The Beast® Model 1680XP with a 18” high x 52” wide mill opening is an efficient, compact machine that allows municipalities, tree services, sawmills and recycling businesses to process and dispose of waste on-site.

 

The large 36” diameter cuttermill with 26 teeth processes material contrary to the beating action found on most competitive models, distinguishing this equipment from similar competitive models.  A wide variety of tooth and screen options are available to adequately process and size material. A single screen is easily changed by being removed from the side of the machine.

The Beast® Model 2680XP Track

The Beast Model 2680XP track is equipped with a 42” diameter by 63” wide cuttermill and a 35″ high x 60″ wide mill opening. This machine uses a 30 or 60-tooth cuttermill running Bandit’s patented saw-tooth style cutterbodies that regulate the size of the tooth’s bite. Most of the material is sized in the initial cut, so material exits the large screening area quicker. The cuttermill on the Beast Model 2680XP track is larger in diameter compared to most competitive grinders allowing it to process larger diameter material with less vibration while using less horsepower and fuel.


The Beast® Model 3680XP Track

The Beast® Model 3680XP track is a high production grinder and is the most popular model offered from Bandit. The 3680XP is equipped with a 42” diameter by 63” wide cuttermill and a 35″ high x 60″ wide mill opening. This machine uses a 30 or 60-tooth cuttermill running Bandit’s patented saw-tooth style cutterbodies that regulate the size of the tooth’s bite. Most of the material is sized in the initial cut, so material exits the large screening area quicker. The cuttermill on the 3680XP track is larger in diameter compared to most competitive grinders allowing it to process larger diameter material with less vibration while using less horsepower and fuel.